Wixroyd’s comprehensive range of machine elements, standard parts, access components and work holding equipment contains a broad selection of sizes in materials including; stainless steel, steel, die case zinc as well as plastic. With a high commitment to stock, Wixroyd can offer next day delivery on most products. CAD models are available for Wixroyd components – visit CAD download. For a free copy of the latest Wixroyd catalogue, the designers indispensable guide to a range of endless possibilities, visit free literature.
Wixroyd are trusted by some of the best known design and manufacturing companies - helping them design, manufacture and assemble their products. Let our technical engineers assists you solve your unique application challenge.
Economy Horizontal Acting Toggle Clamps that come supplied complete with clamping screw and rubber nose. Plastic handle, oil resistant and has holding forces from 380N up to 3,400N.
The opitcal mesurement horizontal acting toggle clamps are designed specifically for clamping of parts during photometric measurement.
The safety lever on the horizontal acting toggle clamp holds the clamping arm in either a clamped or open position, this prevents opening under vibration.
Horizontal acting toggle clamps with open clamping arm and veritcal base for side mounting. Ergonmic, oil resistant handle with large grip surface for soft components. Holding forces from 0,25kN up to 5,0kN.
Horizontal acting, latch type toggle clamps suitable for the food industry. Made from stainless steel and come complete with counter holder. Holding forces from 1,6kN to 7,0kN.
Ergonomic 2-component handle
Stainless rivets and hardened bushings
Moveable stop for variable opening angle
Operator finger protection
Paint wetting impairment free
Heavy duty versions
Matt black surface for optical measurement
The force transmitted to the workpiece by the toggle clamp's closed arm, without itself being deformed when machine forces are applied.
Holding force value is dependent upon proximity of the measuring point to the toggle clamp's pivot point (hence two values, f1 and f2 provided).
The force applied to the workpiece when toggle clamp's arm is closed. Clamping force can only be stated for pneumatic toggle clamps, clamping forces of manual clamps can not be correctly measured as it is dependant upon the operator.
For pneumatically controlled toggle clamps only, f5 is the piston force required to achieve the stated clamping force.