Wixroyd’s comprehensive range of machine elements, standard parts, access components and work holding equipment contains a broad selection of sizes in materials including; stainless steel, steel, die case zinc as well as plastic. With a high commitment to stock, Wixroyd can offer next day delivery on most products. CAD models are available for Wixroyd components – visit CAD download. For a free copy of the latest Wixroyd catalogue, the designers indispensable guide to a range of endless possibilities, visit free literature.
Wixroyd are trusted by some of the best known design and manufacturing companies - helping them design, manufacture and assemble their products. Let our technical engineers assists you solve your unique application challenge.
The pitbull clamp gives you positive down force with holding forces up to 50kN, the option of blunt and knife edge faces dependant of the type of machining.
The talongrip clamp offers a grip height of 1,5 to 3,0 mm and will bite in to the workpeice. It allows aggressive clamping and if often used in conjuntion with the pitbull clamps.
A cam action low profile clamp that has a height range of 2,8 to 12,7mm. The fixture clamps provide a quick and fast workholding solution that can be used in mulit compoent machining.
The machinable fixture clamp can be used to hold irregular parts as the face of the clamp can be machined to suit the workpiece which is also can be achived on the machinable pitbull clamp 12032.
The Versgrip clamps will agressively bite into the workpiece with its penertrating teeth preventing movement of the workpiece. This clamp can be purchsased as part of a set with vice jaws.
The vice jaw set for versagrip clamps comes with a pair of jaws and 4 clamps which is a simple bolt on system. There is also a vice jaw set available for the talongrip clamp which is Product code 12035.
The mini clamps are a very low profile clamp that use unique fingers to push up to the workpeice generating up to 4000n of clamping force.
Clamping above component.
Clamping below component surface.
With a height of less than 6mm and a length of just 20mm mini finger clamps are ideal for multi-component clamping, while maximising access of the tooling. The clamp body is made from spring steel and the eccentric and screw from heat-treated steel, for quick, precise and high clamping forces up to 4000 Newtons.
The finger clamps pivot around an eccentric axis, with clamping via either a right (30°) or left (70°) actuation of the eccentric screw.
Mini finger clamps can position as well as clamp the workpiece – putting pressure against the stops and pulling the workpiece onto the reference surface in one motion.
Often just a single mini clamp can achieve workpiece positioning and clamping against its stops.