One-touch fasteners provide a quick, simple and secure change over solution with no time wasted unfastening screws or other permanent fixings, they achieve a magnetic clamping force of 7N when the pin (33950) and the locating bush (33956) can secure panels/enclosures of 2mm to 6mm thickness.
The positioning clamping pin (12090) consists of four parts, a clamping screw, the actual clamping pin, an O ring and a spring pre-loaded spherical clamping segment. The part is available in both blackened heat-treated steel (1.4542) and precipitation hardened stainless steel to the diameters 16, 20,25 and 30 mm.
The expanding loc down bolts (12098) are an ideal low cost quick component and fixture change that are used in conjunction with locating pins (36340) and drill bushes (30800) for fast and accurate positioning. They are a time saving solution that remove the need for traditional bolts and reduce the tooling interference from the traditional clamping methods.
Pitbull clamps (12031) remain the lowest profile clamps, highest holding force clamp available in the industry today, they generate high vertical and horizontal clamping forces considering their size. The O ring helps to lift the clamp when unclamping and the temperature range is -30°C to +80°C.
Uniforce Clamps are available in both Metric and Inch measurements they enable you to fixture more parts on the machine table whilst working. This then allows for an increase in production, minimize tool changes and reduces wasted space within the work area. The clamp is specially designed with a steel wedge that uniformly clamps on each side of the aluminium channel.